Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform the Service Reset on a Ford Kuga III DFK

Model: Ford Kuga MK 3 - Years 2020-2026
Part: Warning light – error code

This video tutorial shows how to perform the service reset on a Ford Kuga III DFK by following a few simple steps that allow you to work independently. The first step is to carry out maintenance on the vehicle, such as changing the engine oil and filters. After completing the DIY service, get into the vehicle, close all the doors, and fully press and hold both the brake pedal and the accelerator pedal. Turn on the ignition and enter the information MENU, then select the "oil duration" option, which should display 0% used oil. To perform the reset, press and hold the "OK" button until it shows 100%. Reset completed.

Updated on 14 August 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Reset the Service Light on a Ford Kuga II
How to Reset the Service Light on a Ford Kuga II
Ford Kuga (2012-2019 / C520, MK 2) In this video, you will learn how to reset the engine oil service light on a Ford Kuga second series. This operation is very simple, taking only a fe…
How to Perform a Service Reset on a Ford Kuga
How to Perform a Service Reset on a Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In this brief video guide, see how to reset the service light related to engine oil life on a second-generation Ford Kuga, produced from 2012 to 2019…
How to Reset the Service on Ford Kuga
How to Reset the Service on Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) In this video, you can see how to reset the service on a Ford Kuga by following a few simple steps. First, get into your vehicle, ensure all doors ar…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - What does the message "Fuel computer data error" indicate in the Ford Kuga? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos