Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Light on a Ford Kuga

Model: Ford Kuga MK 3 - Years 2020-2026
Part:

To reset the tyre light on a Ford Kuga, first adjust your tyres and then begin the reset. Start the reset by turning on the instrument cluster and pressing the menu button located to the left of the steering wheel to access the vehicle settings. Select "Settings" and then "Assisted Driving"; from the submenu, select "Tyre Monitoring" and then press the OK button. The reset will begin as the bar progresses; when the level reaches 100%, the reset will be successfully completed. Finally, turn off the vehicle.

Updated on 16 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Warning Light on a Ford Kuga
How to Reset the Tyre Warning Light on a Ford Kuga
Ford Kuga (2020-2026 / MK 3) To reset the tyre warning light on the Ford Kuga, first remove the fault, then proceed to reset the light. Start by turning on the instrument cluster…
How to Reset the Tyre Pressure Warning Light on the Ford Kuga
How to Reset the Tyre Pressure Warning Light on the Ford Kuga
Ford Kuga (2012-2019 / C520, MK 2) This guide shows how to reset the tyre pressure warning light on the 2015 Ford Kuga. After checking the tyre pressure with a gauge and comparing it t…
How to Reset the Tyre Pressure Warning Light on Ford Kuga MK2
How to Reset the Tyre Pressure Warning Light on Ford Kuga MK2
Ford Kuga (2012-2019 / C520, MK 2) Let’s go through the essential steps to reset the tyre pressure warning light on a Ford Kuga second series; before performing the operation, it is ne…

Other guides you may be interested in

    Frequently Asked Questions

    • Kuga 2012-2019 - How to reset the tire warning light in Ford Kuga? Read answer

How to Open the Bonnet of a Renault Megane if the Lever is Broken?

If the lever that unlocks the bonnet of the Renault Megane is broken or not functioning, there is an emergency procedure to unlock the mechanism: remove the right front grille located at the top of the bumper. Once the grille is removed, you can locate the actuator mechanism: by pulling the spring in this position, you can unlock the actuator, allowing you to lift the bonnet and access the components located inside the engine compartment. You can then close the bonnet simply by lowering it.

Watch the video!


by ScegliAuto

More videos