Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Maintenance Light on a 2015 Ford Ranger

Model: Ford Ranger T6, P375, PX - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Warning light – error code

See other generations:
Video tutorial

This video shows how to reset the maintenance light on a 2015 Ford Ranger. The procedure is simple, does not require tools or software, and takes less than 1 minute to complete.

To reset the light, first turn on the instrument cluster without starting the engine, turning the key to position 2; then press and hold the brake pedal and the accelerator pedal simultaneously for about 20 seconds until the light starts flashing. When the light begins to flash, release the pedals, turn off the ignition, and start the engine.

At this point, the reset will be complete and the maintenance light will no longer be present on the instrument cluster.


Updated on 23 August 2026 by ScegliAuto


Related tutorials

How to reset the service light on a Ford Ranger?
How to reset the service light on a Ford Ranger?
Ford Ranger (2022-2026 / RA, P703) In this tutorial, you will see how to reset the service light on a Ford Ranger, a very simple and quick operation to perform only after completing al…
How to reset the service light on the Ford Ranger
How to reset the service light on the Ford Ranger
Ford Ranger (2011-2023 / T6, P375, PX) To manually reset the service light on the display of the instrument cluster in your Ford Ranger, you do not need to call a professional. With this g…
How to Reset the AdBlue Warning Light on a Ford Ranger After Refuelling
How to Reset the AdBlue Warning Light on a Ford Ranger After Refuelling
Ford Ranger (2011-2023 / T6, P375, PX) In this video, we will see how to reset the AdBlue warning light on a Ford Ranger after correctly refuelling with AdBlue. The light did not reset its…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos