Do it yourself
| ||||
|
Ford C Max - Video tutorial
Model: Ford C Max
MK 1
- Years 2003-2010 The procedure for replacing the timing belt on the Ford C-Max involves opening the hood, so that it is possible to loosen the screws that secure the protective panel on the left side of the engine block. Additionally, the screws that secure the right front wheel will need to be loosened, removing it along with the corresponding wheel arch. By doing this, the central nut of the belt tensioner can be loosened, reducing the tension and removing the belt from its housing. The new replacement part can now be inserted, ensuring that the engine rotates correctly.
Posted on 31 October 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.025
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |