Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Ford B-Max 1.0 EcoBoost?

Model: Ford B Max MK 1 - Years 2012-2018
Part: Timing belt

To replace the timing belt on a Ford B-Max 1.0 EcoBoost, open the bonnet to access the components in the engine bay: you will also need to loosen the screws securing the front right wheel and the inner cover of the wheel arch. At this point, you will have access to the tensioner pulley, which must be removed from its seat by undoing the central nut: this will allow the belt to be removed from its seat, inserting the new replacement part. After the replacement, reassemble all the removed components, checking their operation.

Updated on 26 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to replacing the timing belt of the Ford B-Max 1.0 Ecoboost
Guide to replacing the timing belt of the Ford B-Max 1.0 Ecoboost
Ford B Max (2012-2018 / MK 1) .. and replace the timing belt of the Ford B-Max 1.0 Ecoboost. First, we open the hood of the car and start disassembling all the electrical wiring.. …
How do you replace the timing belt of the Ford B-Max 1.0 EcoBoost?
How do you replace the timing belt of the Ford B-Max 1.0 EcoBoost?
Ford B Max (2012-2018 / MK 1) .. for replacing the timing belt on the Ford B-Max 1.0 EcoBoost is carried out by opening the hood, so that it is possible to access the components.. …
How do you replace the timing belt of the Ford B-Max 1.0 EcoBoost?
How do you replace the timing belt of the Ford B-Max 1.0 EcoBoost?
Ford B Max (2012-2018 / MK 1) .. The replacement of the timing belt on the Ford B-Max 1.0 EcoBoost is done by opening the hood, so that access to the components inside the engine compartment.. …

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos