Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service Reset on a Ford Fusion

Model: Ford Fusion North America MK 1 - Years 2006-2012
Part: Warning light – error code

In this very short video today, you will see how to perform a service reset on a Ford Fusion, first-generation sedan, without using diagnostic tools, but only using the left button panel on the steering wheel. Let's get started. First, turn on the vehicle's ignition without starting the engine, then press the "settings" button until the screen showing the remaining life of the engine oil appears on the information display of the speedometer. After that, press the "reset" button, then press it again and hold it until the oil life resets.

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Ford Fusion
How to reset the service light on the Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) Today we will explain how to reset the service light related to the car service on a Ford Fusion vehicle produced from 2013 to 2020. After performing…
Reset service on a Ford Fusion
Reset service on a Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) In today's tutorial video, we are shown the entire procedure for resetting the service on a Ford Fusion, second-generation sedan model. So let's star…
Reset the Service Light on Ford Fusion
Reset the Service Light on Ford Fusion
Ford Fusion North America (2013-2020 / MK 2) In this brief guide, you will see the entire procedure necessary to reset the service light on a Ford Fusion, sedan model, second generation (2013-20…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos