Do it yourself
| ||||
|
Ford Focus - Video tutorial
Model: Ford Focus
MK 2, Focus 2
- Years 2004-2011 In this tutorial we can see how to disassemble the intake manifold in the Ford Focus, an operation that requires good manual skills. First of all, we lift the front left side of the vehicle, then disconnect the battery, remove the support bar located under the oil control rod and disconnect all the various indicated pipes. We then remove the filter box, disconnect the remaining pipes and connectors and proceed by unscrewing the fixing bolts of the manifold using a socket wrench. At this point, we separate the manifold from the engine, position the possible replacement and follow the reverse procedure.
Posted on 31 March 2024 by ScegliAuto
Other guides that may interest you |
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.038
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |