Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on a GMC Yukon

Model: GMC Yukon Gmt900 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Service warning light

See other generations:
Video tutorial

If you have just changed the engine oil in your GMC Yukon but the warning light won't turn off, you need to perform the following manual reset. First, make sure to start the entire procedure with the vehicle turned off. Then, insert the key, turn it to position one, and turn on the ignition without starting the engine.

At this point, locate the buttons to the right of the steering wheel and press the one with a small car icon once. Immediately after, press and hold the button with the "check" symbol for a few seconds and release it as soon as the oil life displayed returns to "100%".


Updated on 26 May 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Light on a 2011 GMC Yukon
How to Reset the Oil Light on a 2011 GMC Yukon
GMC Yukon (2007-2014 / Gmt900) If you want to manually reset the oil light on your 2011 GMC Yukon, follow this procedure. It only takes a few simple steps to complete. First, enter…
How to Replace the Gas Springs on a GMC Yukon Trunk
How to Replace the Gas Springs on a GMC Yukon Trunk
GMC Yukon (2000-2006 / Gmt800) To replace the gas springs on the GMC Yukon trunk, open the rear hatch to access the support springs inside. To remove these springs, unscrew the bol…
How to Reset the Oil Service on the GMC Yukon?
How to Reset the Oil Service on the GMC Yukon?
GMC Yukon (2007-2014 / Gmt900) In this tutorial, we will see how to reset the oil service on the GMC Yukon, a very simple operation to perform only after completing all required ma…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos