Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a 2017 GMC Sierra?

Model: GMC Sierra MK 4 - Years 2014-2018
Part: Service warning light

In this new mini guide dedicated to the 2017 GMC Sierra, discover the necessary steps to manually reset the service light. First, insert the key and turn on the ignition. Use the up and down arrows located on the right side of the steering wheel to scroll through the onboard computer menu until you see the vehicle maintenance option. At this point, turn off and then turn on the ignition again, and press the button with the right arrow. Select the "Reset" option and confirm the operation. Finally, exit the menu.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a 2016 GMC Sierra
How to Reset the Oil Light on a 2016 GMC Sierra
GMC Sierra (2014-2018 / MK 4) If you notice the oil pressure light stays on when you start your 2016 GMC Sierra, even after changing the oil and filter, follow these steps to manu…
How to Reset the Oil Service Light in a GMC Sierra?
How to Reset the Oil Service Light in a GMC Sierra?
GMC Sierra (2014-2018 / MK 4) In this tutorial, you will see how to reset the oil service light in the GMC Sierra pickup, a very simple and quick operation that should only be don…
How to Reset the Oil Light on a 2011 GMC Sierra
GMC Sierra (2007-2014 / MK 3) The procedure to manually reset the oil change warning light on your 2011 GMC Sierra is quite simple. Below are all the necessary steps to complete t…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos