Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset Oil Life on GMC Savana

Model: GMC Savana MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Onboard computer

See other generations:
Video tutorial

In this video tutorial, you will see how to reset the oil life on a GMC Savana. First, perform maintenance on the vehicle, such as changing the engine oil and filters.

After completing the DIY service, get inside the vehicle, engage the parking brake, insert the key, and turn on the ignition without starting the engine; press the button on the left side of the steering wheel until the oil life is displayed. Once the oil life is shown, hold down the button (checkmark) to the left of the steering wheel until it shows 100%. Turn off the ignition and then turn it back on to verify the oil life reset.


Updated on 14 July 2026 by ScegliAuto


Related tutorials

How to Reset the Oil Service Light on a GMC Savana?
How to Reset the Oil Service Light on a GMC Savana?
GMC Savana (2003-2024 / MK 2) In this tutorial, you will see how to reset the oil service light on a GMC Savana, a very simple and quick operation to perform only after completing…
How to Reset the Oil Light on a GMC Savana
How to Reset the Oil Light on a GMC Savana
GMC Savana (2003-2024 / MK 2) The procedure to manually reset the engine oil warning light on your 2006 GMC Savana is very simple and takes just a few seconds to complete. Everyth…
How to Reset the Oil Service Light on a GMC Savana Van?
How to Reset the Oil Service Light on a GMC Savana Van?
GMC Savana (2003-2024 / MK 2) As shown in this tutorial, resetting the oil service light on a GMC Savana is a very simple and quick operation. This procedure should only be perfor…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos