Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Hyundai I10 levels check

Model: Hyundai I10 IA, MK 2 - Years 2013-2020
Part: Checks and maintenance

In this video we check the levels of a Hyundai i10: we open the hood and immediately find the windshield washer fluid tank, with its blue cap; the cap with grooves on the sides is for brake fluid, and if it decreases we will need to check the condition of the brake pads, otherwise we have a leak somewhere. On the left side of the engine block is the cap for topping up the engine oil; we check the oil level using the dipstick located in front of the radiator: we remove it, clean it, and then put it back in. Only then can we read the level, which should be between "min" and "max". Next to it we will find the radiator cap, which can only be opened when the car is cold; if necessary, we can add coolant (of the same color as the one already present) to the tank next to it. Then we have the battery where we have the black negative pole and the red positive pole.

Posted on 23 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a Hyundai i10
How to Reset the Service Light on a Hyundai i10
Hyundai I10 (2019-2026 / AI3, AC3) To reset the service light on a Hyundai i10, turn on the vehicle's instrument panel and press the Menu button located on the right side of the steeri…
What is the fuse layout of the Hyundai i10?
What is the fuse layout of the Hyundai i10?
Hyundai I10 (2019-2026 / AI3, AC3) In this video we can see where the fuse boxes of the Hyundai I10 are located and what the corresponding diagrams are, to consult in case we need to c…
How to reset the service indicator light on the Hyundai i10
How to reset the service indicator light on the Hyundai i10
Hyundai I10 (2019-2026 / AI3, AC3) If you own a third-generation Hyundai I10 and want to complete the manual service light reset procedure on your own, all you have to do is read the f…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos