Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Engine Oil Light on the 2016 Jeep Compass

Model: Jeep Compass MK 49, MK 1 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Service warning light

See other generations:
Video tutorial

This short video illustrates the procedure to reset the oil change light on the 2016 Jeep Compass, in case the light remains on after an oil change. To reset this light, first turn on the instrument cluster without starting the engine by turning the key to position 2, then slowly press the accelerator pedal three times before turning off the ignition for 10 seconds and then restarting it. If the light is still present on the instrument cluster after the procedure, repeat the steps just performed.


Updated on 28 October 2026 by ScegliAuto


Related tutorials

How to reset the oil change light on the 2021 Jeep Compass
How to reset the oil change light on the 2021 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In today's article, we will show you how to reset the oil change indicator light on the Jeep Compass 2nd generation. For this operation, no tools or …
How to reset the oil change on the 2021 Jeep Compass
How to reset the oil change on the 2021 Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) In the following article, we will see how to reset the oil change indicator light on the 2021 Jeep Compass. This operation will take less than 1 minu…
How to reset the maintenance interval of the Jeep Compass
How to reset the maintenance interval of the Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) In this article, we will show you how to reset the maintenance interval on the Jeep Compass. This procedure is useful in case it is not reset by the …

Other guides you may be interested in

    Frequently Asked Questions

    • Compass 2016-2025 - How to reset the "Service" light on a Jeep Compass? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos