|
Do it yourself
| |||
| ||||
Service Reset for a Jeep Compass 1.6 MultiJet
Model: Jeep Compass
MK 49, MK 1
- Years:
2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
This video is currently unavailable
Let's see how to reset the service light on a Jeep Compass 1.6 MultiJet. Unlike other vehicles, the Jeep Compass does not allow manual reset through button combinations on the dashboard or pedals, but requires the use of a professional diagnostic tool that must be connected to the internet and have a valid FCA subscription (SGW - Secure Gateway). The service reset (which resets the counter to 20,000 km or 365 days) occurs remotely via the automotive group's secure network. Without this online authorisation, the vehicle's security systems block data writing. The video presents a complete service: Removal of the underbody cover (8 mm and 10 mm screws) and the drain plug from the sump (13 mm socket). Mandatory replacement of the plug gasket. Oil Filter: Located above the driveshaft; replace the air filter cartridge; disconnect the electrical connectors and fuel lines to replace the internal cartridge and the two gaskets of the diesel filter support. After changing the diesel filter, turn the ignition on and off several times (using the Start button without pressing the brake to avoid starting the engine) to allow the electric pump to fill the circuit and eliminate air. Initially, add 4 litres of oil, start the engine to fill the filter, and then top up (about 1 litre more) to the maximum level. Finally, replace the cabin filter, located behind the passenger side glove compartment.
Posted on 18 June 2026 by ScegliAuto
Related tutorials
Jeep Compass
(2006-2016 /
MK 49, MK 1)
Resetting the oil change light on the Jeep Compass is a very simple procedure that will take little time. To reset the oil change light, turn on the …
Jeep Compass
(2016-2025 /
552, MK 2)
Before you can start, sit in the driver's seat of your Jeep Compass. Begin by activating the instrument cluster without starting the engine by pressi…
Jeep Compass
(2016-2025 /
552, MK 2)
Today's main instructions will show you the procedure for removing and replacing the alternator pulley on a Jeep Compass 2.0 MultiJet in simple steps…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open the Bonnet on the Mitsubishi L200?
In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.074
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |