Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to reset the oil warning light on the Jeep Cherokee

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee MK 5, KL - Years 2013-2023
Part: -board computer
Operation: How to reset the oil warning light on the Jeep Cherokee

If you have just changed the engine oil in your new Jeep Cherokee, but the warning message continues to appear on the dashboard mini display, then you must necessarily perform a manual reset using the steering wheel controls. First make sure you start the procedure with the vehicle completely shut down and the doors closed. Then turn on the ignition and scroll through the menu until you find the item relating to the residual life of the oil. At this point, keep the "OK" button pressed for a few seconds and release it as soon as the reset operation is complete.


Posted on 14 April 2024 by ScegliAuto



How do you reset the Jeep Cherokee Oil Service light?
Jeep Cherokee (2013-2023 / MK 5, KL) In order to reset the Jeep Cherokee's Oil Service warning light, you need to turn the key in the appropriate cylinder, so that the instrument panel i
How to reset the oil warning light on the Jeep Cherokee
Jeep Cherokee (2008-2012 / KK, MK 4) Resetting the oil warning light on the 2010 Jeep Cherokee is very simple and takes just a few seconds to complete the entire operation correctly. Let
How to reset the oil warning light on the Jeep Cherokee
Jeep Cherokee (2013-2023 / MK 5, KL) If you have just changed the oil and the relative filter in your Jeep Cherokee and you notice the warning light on the display, do not worry because

Other guides that may interest you

    Frequently Asked Questions

    • Cherokee 2013-2023 - Why doesn't the Jeep Cherokee Start&Stop system work? Read Answer

How to set the clock on the Yamaha Xmax 300

To change the time of the Yamaha Xmax 300, keep the "trip" button pressed, at the same time turn the ignition to "on"; release the "trip" button when the time starts flashing; briefly press the "trip" button to set the time; press and hold for a few seconds to confirm and move on to the minutes; briefly press the same button to set the minutes; we long press the same "trip" button to confirm; at this point in the meantime that we hold down the minutes stop flashing the time has been saved correctly and we can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos