Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Oil Light on the Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Service warning light

See other generations:
Video tutorial

If you have just changed the engine oil in your 2013 Jeep Wrangler, but the warning light continues to appear on the dashboard, simply follow these instructions to perform a quick reset. First, insert the key, turn on the ignition, and ensure the gear lever is in "P" (Parking).

Turn off the ignition and press the accelerator pedal three times in quick succession. Once done, turn the ignition back on and the warning light should be gone.

If there are any errors, you can repeat the procedure without any issues.


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How to reset the oil light on the 2025 Jeep Wrangler
How to reset the oil light on the 2025 Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) If you want to find out how to manually reset the engine oil light on your new Jeep Wrangler (year 2025), all you have to do is read the following st…
How to Reset the Oil Light on a Jeep Wrangler
How to Reset the Oil Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) To manually and independently reset the engine oil light on your Jeep Wrangler Mk3, follow these simple steps in this mini guide. First, enter the ca…
How to Reset the Service Light on a Jeep Wrangler
How to Reset the Service Light on a Jeep Wrangler
Jeep Wrangler (2018-2026 / JL, MK 4) Today's procedure will show you how to reset the service light for the routine maintenance of the engine oil change on a Jeep Wrangler. First, get in…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos