Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to reset the oil warning light on the Jeep Cherokee

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee MK 5, KL - Years 2013-2023
Part: -board computer
Operation: How to reset the oil warning light on the Jeep Cherokee

Resetting the engine oil warning light on your Jeep Cherokee is undoubtedly one of the quickest and simplest operations to be carried out in total autonomy and without the help of an expert. First, go to the driver's side and press the Start button so that only the ignition is turned on. Then, using the directional arrow buttons located to the left of the steering wheel, navigate the menu until you see the vehicle icon. At this point all that remains is to hold down the up arrow button for a few seconds. As soon as a message appears confirming the reset is complete, release the button and the whole operation is done.


Posted on 22 August 2022 by ScegliAuto



How do you reset the Jeep Cherokee Oil Service light?
Jeep Cherokee (2013-2023 / MK 5, KL) In order to reset the Jeep Cherokee's Oil Service warning light, you need to turn the key in the appropriate cylinder, so that the instrument panel i
How to reset the oil warning light on the Jeep Cherokee
Jeep Cherokee (2008-2012 / KK, MK 4) Resetting the oil warning light on the 2010 Jeep Cherokee is very simple and takes just a few seconds to complete the entire operation correctly. Let
How to reset the oil warning light on the Jeep Cherokee
Jeep Cherokee (2013-2023 / MK 5, KL) If you have just changed the engine oil in your new Jeep Cherokee, but the warning message continues to appear on the dashboard mini display, then yo

Other guides that may interest you

    Frequently Asked Questions

    • Cherokee 2013-2023 - Why doesn't the Jeep Cherokee Start&Stop system work? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos