Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Brake Disc on a Jeep Wrangler

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Brake rotors

In this video, learn how to change the brake disc and brake pads on a Jeep Wrangler. First, lift the vehicle on a column lift to a comfortable height, then remove the wheel (using a socket spanner or air drill) with the respective bolts. Unscrew the locking bolt of the brake caliper and remove it from the caliper mount. Using a socket spanner, remove the caliper mount from the wheel hub. Once the brake disc is free, unscrew the screws with a fixed spanner and detach the disc from the wheel hub. Disconnect the various wiring and brake fluid hoses from the wheel body. Replace them with new parts (always install original and compliant parts). Prepare to install the new disc with the respective pads, brake caliper, caliper mount, etc. Proceed with the assembly in reverse order of disassembly.

Updated on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Brake Pads on a Jeep Wrangler?
How to Replace the Front Brake Pads on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) To replace the front brake pads on a Jeep Wrangler, first, loosen the wheel bolts of the corresponding wheel. Once the wheel is removed, you will hav…
How to Replace the Wheel Speed Sensor on the Jeep Wrangler
How to Replace the Wheel Speed Sensor on the Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Today, we will see in this brief and simple guide how to remove and replace the speed sensor located behind the front wheel of the Jeep Wrangler. Fir…
How to Replace the Wheel Bearing on the Jeep Wrangler MK3
How to Replace the Wheel Bearing on the Jeep Wrangler MK3
Jeep Wrangler (2007-2018 / MK 3, JK) Today, we will see in this video tutorial the steps to disassemble and replace the wheel bearing on the third series Jeep Wrangler. First, lift the v…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos