Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Headlight Bulbs/LEDs on a Lancia Ypsilon

Model: Lancia Ypsilon 843, MK 2, Ypsilon 2, Y2 - Years 2003-2011
Part: Tail light bulb

Do you want to replace the rear headlight bulbs/LEDs on your Lancia Ypsilon but don't know how to proceed? Here's how to do it: open the boot and use a screwdriver to unscrew the securing pins located at the side of the rear headlight (use a socket or screwdriver with a bit). Once the headlight is free from any constraints, disconnect it from the bodywork (unplug the relevant power connectors). Replace the damaged bulbs with identical pieces of the same size and voltage. Finally, refit the headlight and reverse the assembly process. Test the correct operation of the previously installed lights.

Updated on 3 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Headlight Bulb on a Lancia Ypsilon
How to Replace the Rear Headlight Bulb on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) To replace the rear headlight bulb on a Lancia Ypsilon, open the tailgate and loosen the two fixing screws located immediately next to the light clus…
Replacing the Headlight Bulbs on a Lancia Ypsilon
Replacing the Headlight Bulbs on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) Replace the bulbs in the front headlight on a Lancia Ypsilon: open the bonnet by pulling the lever located at the bottom right of the dashboard, and …
Replacing the Front Headlamp Bulb on a Lancia Ypsilon
Replacing the Front Headlamp Bulb on a Lancia Ypsilon
Lancia Ypsilon (2003-2011 / 843, MK 2, Ypsilon 2, Y2) In today's tutorial, you will see how to remove and replace the front headlamp bulb on a second series Lancia Ypsilon. First, open and lift the bonne…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos