Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Battery from the Range Rover Evoque

Model: Land Rover Evoque L538, MK 1 - Years: 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Battery

See other generations:
Video tutorial

Remove the damaged battery from the Evoque? Start by opening the car door and releasing the hood latch. Lift the hood, disengaging the safety latch with your fingers, then secure it. You will find the battery in the upper right.

Remove the plastic cover, unscrew the battery terminal clamps, then take the battery out of the engine compartment. Replace the old battery with a new one (same voltage).

Close the hood after maintenance. Test the engine start of the vehicle.


Updated on 20 March 2026 by ScegliAuto


Related tutorials

Replacing the Key Fob Battery for Land Rover Range Rover Evoque
Replacing the Key Fob Battery for Land Rover Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) In this video, you will see how to disassemble and replace the battery of the key fob for a Land Rover Range Rover Sport, as well as the standard Ran…
Replacing the Key Fob Battery for Range Rover Evoque
Replacing the Key Fob Battery for Range Rover Evoque
Land Rover Evoque (2011-2018 / L538, MK 1) In this video tutorial, you will learn how to disassemble and replace the battery in the key fob of a Range Rover Evoque. First, take your key fob an…
Replacing the Remote Key Battery on Range Rover Evoque - Velar
Replacing the Remote Key Battery on Range Rover Evoque - Velar
Land Rover Evoque (2018-2026 / MK 2, L551) In this video tutorial, you will see step-by-step instructions for disassembling and replacing the battery in the key remote for the second generatio…

Other guides you may be interested in

    Frequently Asked Questions

    • Evoque 2011-2018 - Where is the Range Rover Evoque battery located? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos