Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Land Rover
    3. :
  3. Freelander
    4. : How to replace turn signal bulbs on Freelander

Land Rover Freelander - Video tutorial

Model: Land Rover Freelander Freelander 1 - Years 1997-2006
Part: Headlight bulb
Operation: How to replace turn signal bulbs on Freelander

How to replace the headlight bulb on Freelander? Let's see how the front headlight bulbs are removed. We remove the access cover from inside the stone guard and arrive at the arrow spotlight. Or we lift the front cover of the engine compartment, remove all the covers of the headlight. We put our hand in and remove the bulb from its connector, we replace the damaged bulbs with new ones (size and voltage equal). After replacing the worn bulbs, let's get ready to refit the cover of the stone guard compartment. We test the operation of the front arrow of the car.


Posted on 15 February 2024 by ScegliAuto



How to replace the rear headlight bulbs of the Land Rover Freelander
Land Rover Freelander (1997-2006 / Freelander 1) The steps outlined in this guide will show us how to disassemble and replace the rear taillight and its bulbs on the Land Rover Freelander. First, le
Disassembly of the headlights on the Land Rover Freelander 2
Land Rover Freelander (2006-2016 / Freelander 2) Let's find out how to remove the headlights on the second series Land Rover Freelander, in simple and quick steps. First of all we open and lift the
How to perform service and oil change on the Land Rover Freelander 2.
Land Rover Freelander (2006-2016 / Freelander 2) In this video, we see how to reset the maintenance light and oil change light on the Freelander 2. To reset them, simply start the instrument panel w

Other guides that may interest you

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos