Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Hybrid Battery Air Filter on a Lexus UX250H

Model: Lexus UX MK 1 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Air filter

Video tutorial

In this video, learn how to replace the hybrid battery air filter on a Lexus UX250H: at least once a year, visually check the condition of this filter, and if you notice a significant build-up of dirt, clean or completely replace the filter. This will prolong the life of the hybrid battery.

The filter is located under the rear seat, behind the front passenger seat. You will find a grille with plastic screws that need to be removed to access the filter, which is attached directly to the grille.

If you wish to change it, you can find it on eBay with the code 372751622091 for £12.33 (+£16.88 for international shipping). As shown in the video, the filter detaches easily starting from the single hook and then disconnecting the pair from the other side.

To refit the component, simply slot it back in and then replace the screw you removed earlier.


Updated on 22 August 2026 by ScegliAuto


Related tutorials

Lexus UX (2018-2026 / MK 1) To complete the manual reset of the oil light on your 2021 Lexus UX250h, you need to follow these simple steps. First, get into the car and start the…
Lexus UX (2018-2026 / MK 1) To replace the battery in the remote control for the Lexus UX, slide the key out from the top of the device, removing it completely: after removing t…
Lexus UX (2018-2026 / MK 1) Replacing the key battery of a Lexus UX is a straightforward task that does not require a visit to an authorised workshop. The first step is to remov…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos