Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Lincoln
    3. :
  3. Navigator
    4. : How to reset the engine oil warning light in a Lincoln Navigator

Lincoln Navigator - Video tutorial

Model: Lincoln Navigator U326 - Years 2007-2017
Operation: How to reset the engine oil warning light in a Lincoln Navigator

The steps to perform in order to perform the engine oil warning light reset procedure on a 2017 Lincoln Navigator automobile are simple and short-lived. First we get on board the vehicle, and turn on the instrument panel by pressing the start and stop button once, without starting the car. At this point we use the buttons above the steering wheel, on the left; press the ok button and then use the directional arrows to navigate the settings menu: select the settings item, then advanced settings, then vehicle and finally oli life reset. Press the ok button and wait for the percentage shown on the display to reach 100. The procedure is now complete.


Posted on 14 September 2022 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos