Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Maruti Wagon R Stingray Mk2

Model: Maruti Wagon R Stingray MK 2 - Years 2010-2017
Part: Engine oil

This guide shows how to perform the engine oil change on the Maruti Wagon R Stingray Mk2. The first step is to secure the vehicle and, from underneath, remove the oil pan plug with a 14 mm wrench; let the old lubricant drain into a disposal container. Unscrew the oil filter cartridge located near the oil pan. Clean any oil residue and reinstall the oil pan plug. Install the new filter, lubricating the gasket with some oil. Add the correct amount of engine oil as specified in the owner's manual, and start the engine. Check the fluid level again.

Updated on 17 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on a Maruti Wagon R Stingray?
How to Replace the Air Filter on a Maruti Wagon R Stingray?
Maruti Wagon R Stingray (2010-2017 / MK 2) To replace the air filter on a Maruti Wagon R Stingray, open the hood to access the components inside the engine compartment. In the center of the co…
How to Replace the Cabin Air Filter on a Maruti Wagon R Stingray?
How to Replace the Cabin Air Filter on a Maruti Wagon R Stingray?
Maruti Wagon R Stingray (2019-2026 / MK 3) To replace the cabin air filter on a Maruti Wagon R Stingray, open the glove compartment located on the passenger side to release the internal clips …
How to Replace the Cabin Air Filter in the Maruti Wagon R Stingray?
How to Replace the Cabin Air Filter in the Maruti Wagon R Stingray?
Maruti Wagon R Stingray (2010-2017 / MK 2) As shown in this tutorial, replacing the cabin air filter in the Maruti Wagon R Stingray is a very simple and quick task. You won't need any special …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos