Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove an Ignition Coil from a Mazda 6

Model: Mazda 6 GG, MK 1 - Years 2002-2008
Part: Ignition coil

In this video, see how to remove the ignition coil from your car. Pull the lever located at the bottom left of the dashboard, lift the bonnet, and secure it. Next, remove the plastic engine cover, taking care not to lose the rubber clips. Disconnect all the connectors from the ignition coils, unscrew the respective screws using a socket and pliers. Extract the ignition coils from the engine head. Prepare to carefully refit the new coils into their corresponding slots, tightening all the bolts with the socket and pliers. Finally, reattach the plastic engine cover.

Updated on 24 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Mazda 6 (2012-2024 / GJ, MK 3) To turn off the display in the Mazda 6, follow these steps: Ensure the car is on and the infotainment system is active. Look for the display power on…
Mazda 6 (2012-2024 / GJ, MK 3) To reset the infotainment system of the Mazda 6, turn on the dashboard by inserting the key into the ignition and pressing the appropriate start butt…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos