Do it yourself
Frequently asked questions about cars and motorcycles

Disassembly of Air Conditioning Radiator

Model: Mercedes Classe C W203 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Part: Air conditioner

See other generations:
Video tutorial

To access the air conditioning radiator, start by disassembling the air intake located under the windshield in the engine compartment and remove the connecting hoses to the radiator. Remove the battery from its housing.

Disassemble the complete radio console and the center tunnel. Remove the glove compartment and part of the attached dashboard.

Next, disassemble the steering wheel, dashboard, and plastic covers on the steering column. Then proceed to remove the parts on the tunnel under the transmission and the electrical components contained within.

Remove the parts covering the roof pillars. Unscrew all the dashboard retaining screws until it is completely removed.

Also, take off the side parts of the tunnel. Disassemble the air conditioning radiator unit, which can now be completely removed.

Place the unit on a flat surface and remove all various parts to access the radiator to be replaced. After replacing the radiator, carefully reassemble all disassembled parts.


Updated on 3 February 2026 by ScegliAuto


Related tutorials

Mercedes Classe C (2000-2007 / W203) In this guide we will see step by step instructions on how to disassemble and replace the heater radiator of the Mercedes C-Class. First, we get on b…
Mercedes Classe C (2007-2013 / W204) The steps illustrated in this guide will show you the procedure for removing and replacing the pulley and bearing of the air conditioning compressor …
Mercedes Classe C (2007-2013 / W204) This brief guide will illustrate one possible solution for the malfunction of the air conditioner on the Mercedes C-Class. The first check to perform…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light in the Suzuki Swift?

To reset the tyre pressure warning light in the Suzuki Swift, turn on the ignition, then navigate through the menu using the button located on the right side: this button should be rotated to locate the options displayed. You will need to select the option indicating tyre pressure and then select the "Reset" option: this way, the sensors will read the new tyre pressure values. If the tyres have been inflated to the correct pressure, the light will turn off automatically.

Watch the video!


by ScegliAuto

More videos