Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Slk
    4. : How to replace oil and engine filter on Mercedes Clk

Mercedes Slk - Video tutorial

Model: Mercedes Slk MK 2, R171 - Years 2004-2011
Part: Engine oil
Operation: How to replace oil and engine filter on Mercedes Clk

How to replace oil and engine filter on Mercedes Clk? Let's see in this video guide how to proceed with the replacement: open the car door and pull up the engine compartment opening lever located at the bottom left of the dashboard and lift up the front hood, we secure the same. With a socket wrench we unscrew the large locking pin of the container cap (where it is located) of the oil filter. We lift the car on a jack (column bridge) and unscrew the oil sump pin; let the liquid flow into a container. Finally we top up the new liquid and close the front hood.


Posted on 15 November 2023 by ScegliAuto



Change oil and oil filter on Mercedes SLK r170
Mercedes Slk (1997-2004 / R170, MK 1) Hello everyone! Today we will show you how to change oil on Mercedes Slk r170, knowing that for this model we recommend using a 5w-30 lubricant. Befo
Removing the gear selector lever knob Mercedes E, S, C, CL, ML, SLK, CLK Class
Mercedes Slk (2004-2011 / MK 2, R171) In this short video tutorial we will see how to remove the gear selector lever knob on various Mercedes-Benz models, such as the E, S, C, CL, ML, SLK
Oil change and automatic transmission filter
Mercedes Slk (1997-2004 / R170, MK 1) To change the oil on the automatic gearbox you must first obtain the oil (5 liters), the gasket and the filter as shown in the first sequences. Then

Other guides that may interest you

Disassembly of the gear knob on the Lancia Ypsilon 2

Today we will see, in this video tutorial, how to remove and replace the gear knob on the second series Lancia Ypsilon, but also on the Lancia Musa, in simple and quick steps. We get inside the car and start by removing the old gear knob; to do this, just unscrew it anticlockwise, as shown in the video. At this point we also remove the gearshift gaiter, in order to replace, if necessary, it too; we just have to fix the new headset and insert the new gear knob, screwing it correctly and without creating play on the gear lever!

Watch the video!


by ScegliAuto

More videos