Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Clk
    4. : Replacement of the car dashboard

Mercedes Clk - Video tutorial

Model: Mercedes Clk W208 - Years 1997-2003
Part: Central tunnel
Operation: Replacement of the car dashboard

In the central tunnel of our car there are various devices and instruments: radio, controls, air vents, air conditioning, and auxiliary controls. The guide shows how to remove the dashboard. There are screws and special joints on which to leverage without forcing too much. To disassemble the dashboard, first of all, remove the two Allen screws on the sides of the dashboard, in the lower bulkheads, near where the air vents for the feet are located. Near the lower part of the ashtray or in the glove compartment there are two other Allen screws which must also be removed. Once the 4 screws of the dashboard have been removed, it can be detached.


Posted on 14 September 2023 by ScegliAuto



Dashboard injury repair instructions
Mercedes Clk (1997-2003 / W208) If on the dashboard there is a lesion such as a crack caused for example by the aging of the coating itself, you can think of restoring it with paint
Replacement of climate control light bulb
Mercedes Clk (1997-2003 / W208) In order to replace the backlight bulbs of the climate control controls, you need the special keys to remove the control panel: insert the keys in th
How to remove the glove compartment of a Mercedes CLK
Mercedes Clk (1997-2003 / W208) Let's see in this video how to remove the glove compartment (where there is the ashtray) from the dashboard of a Mercedes CLK Class. With a plastic l

Other guides that may interest you

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos