Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Cruise Control in the MG ZS Luxury

Model: MG ZS MK 2 - Years 2024-2026
Part: Checks and maintenance

Cruise control is an electronic device that allows you to limit the speed of a vehicle, preventing it from being inadvertently exceeded and reducing the risk of getting a ticket. It has been available in cars for several years, including the MG ZS. To set it, turn on the instrument cluster, press the button at the end of the shorter lever on the left side of the steering wheel, and then select the desired speed by pushing the lever up to increase and down to decrease. That's all you need to do; no additional settings are required.

Posted on 14 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Use the Cruise Control on the MG ZS
How to Use the Cruise Control on the MG ZS
MG ZS (2017-2024 / Zs11) Today's guide shows you how to properly use the cruise control on the MG ZS, following the instructions below. First, get in the vehicle and start dr…
How to Activate Cruise Control in MG Cars?
How to Activate Cruise Control in MG Cars?
MG ZS (2024-2026 / MK 2) Among the various MG vehicles, we focus on the MG ZS. In the video review, we explain how to engage the cruise control, which maintains the maximum s…
How to Set Up ACC and ICA on MG ZS
How to Set Up ACC and ICA on MG ZS
MG ZS (2024-2026 / MK 2) Let's see how to use Adaptive Cruise Control (ACC) and Intelligent Cruise Assistance (ICA) on the MG ZS: set up the car before starting. From the mul…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos