Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Radio for Repair

Model: Nissan Pixo MK 1 - Years 2009-2013
Part: Car stereo

Using a plastic tool to avoid damaging the bodywork, lever the air grille of the dashboard and remove it from its housing. Unscrew the securing screw in the compartment and remove it completely using the plastic tool. Unscrew the screws now accessible beneath the compartment and also remove the trim including the air vents, taking care with the connected electrical wires. Move the vents aside to easily access the securing screws of the radio console that need to be removed. Carefully remove the plastic trim of the console and remove the other four securing screws. Remove the radio and disconnect all the wiring connectors.

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How is the service performed on the Nissan Pixo?
How is the service performed on the Nissan Pixo?
Nissan Pixo (2009-2013 / MK 1) It is well known that when the service light comes on in a car, it means that the maintenance check is due and that periodic maintenance needs to be …
How to Replace the Air Filter on a Nissan Pixo
How to Replace the Air Filter on a Nissan Pixo
Nissan Pixo (2009-2013 / MK 1) Before you begin, open the bonnet of your Nissan Pixo. Start by removing the air filter cover by unfastening the clips, unscrewing the relevant screw…
How to Remove the Door Panel of a Nissan Pixo?
How to Remove the Door Panel of a Nissan Pixo?
Nissan Pixo (2009-2013 / MK 1) To remove the door panel of a Nissan Pixo, first unscrew the bolt located next to the window switch panel. Once this is removed, you can detach the t…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos