Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What does the warning light with the symbol of the wrench indicate on the Opel Insignia?

Model: Vauxhall Insigna Insigna A, MK 1 - Years 2008-2017
Part: Checks and maintenance

The warning light with the wrench symbol on an Opel Insignia vehicle indicates the need for a car service. It is therefore necessary to perform all operations that make up the car service, such as replacing the oil filter and engine oil. After performing the service, we must reset the warning light to update the mileage for the next car service. If the warning light is not reset when the vehicle is turned on or after a few months from resetting the light, it is necessary to go to a workshop to connect the vehicle to the diagnostic computer to scan the car. The causes of this malfunction are due to a broken oil pipe, malfunctioning oil tank sensors, or vehicle spark plugs.

Posted on 30 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on a 2017 Opel Insignia
How to Reset the Service Light on a 2017 Opel Insignia
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) When the service light with the spanner symbol activates on the dashboard of the 2017 Opel Insignia, it means you need to visit an authorised worksho…
How to reset the oil light on a 2014 Opel Insignia
How to reset the oil light on a 2014 Opel Insignia
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) Today we will explain how to reset the oil light of the 2014 Opel Insigna. This operation can be done independently, after performing the oil replace…
What does error code 55 indicate on the Opel Insignia?
What does error code 55 indicate on the Opel Insignia?
Vauxhall Insigna (2008-2017 / Insigna A, MK 1) Error code 55 for the Opel Insignia indicates that it is necessary to perform a regeneration of the particulate filter. Regeneration is usually done …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos