Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Opel Vivaro?

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Fuse box

The two fuse boxes found inside the Opel Vivaro serve to contain the fuses that regulate the operation of the devices present in the vehicle. In this type of car, there will be one box inside the cabin and one in the engine compartment. The first will be located in the dashboard area, accessible only by opening the driver's door: inside it, you will find the fuses for the courtesy lights, airbags, instrument panel, etc. The second box will be located on the right side of the engine compartment: it contains the fuses for the radiator fan, windshield wipers, etc.

Posted on 2 December 2025 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Opel Vivaro?
Where is the fuse box located in the Opel Vivaro?
Vauxhall Vivaro (2014-2019 / MK 2) Inside the Opel Vivaro model B, produced from 2014 to 2019, there are two fuse boxes. The first fuse box is located inside the front hood, specifical…
Where are the fuses located in the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) On the Opel Vivaro, the fuses are all contained within two fuse boxes that are installed in the vehicle: these are located inside the cabin and insid…
Where are the fuses located in the Opel Vivaro?
Where are the fuses located in the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) All the fuse boxes of the Opel Vivaro are used to contain the fuses that regulate the operation of the devices installed on the vehicle: these will b…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos