Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Opel Mokka, Changing the Oil Filter.

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

The video illustrates how to remove the oil filter. After carefully checking the engine oil level (pull out the dipstick, clean it with a soft absorbent cloth, reinsert it and slowly push it down until it locks, then pull it out again to check the oil level).

After verifying the oil level, use an Allen key to remove the filter block. You will notice that the old filter is dirty.

Once the old filter is removed, install the new one (the new filter must be identical to the old one; otherwise, it will be impossible to refit) and secure it. Refill the oil and test the car.


Updated on 11 March 2026 by ScegliAuto


Related tutorials

Where is the Engine Oil Filter on the Opel Mokka?
Where is the Engine Oil Filter on the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) When changing the engine oil on your first-generation Opel Mokka, it is advisable to also replace the appropriate filter to avoid unpleasant issues. …
How to replace the engine oil and oil filter of the Opel Mokka 1.6 CDTi
How to replace the engine oil and oil filter of the Opel Mokka 1.6 CDTi
Vauxhall Mokka (2012-2019 / Mokka A) Today we will see the necessary steps to carry out the ordinary maintenance check, replacing the engine oil and oil filter of the Opel Mokka 1.6 CDTi…
Where is the oil filter in the Opel Mokka?
Where is the oil filter in the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) In this video, you can see where the oil filter is located in the Opel Mokka and how to proceed if you need to replace it. This operation is, of cour…

Other guides you may be interested in

    Frequently Asked Questions

    • Mokka 2012-2019 - What to do if the trunk of your Opel/Vauxhall Mokka won't open? Read answer
    • Mokka 2012-2019 - What do the codes 82 and 89 of the Opel Mokka mean? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos