Do it yourself
Frequently asked questions about cars and motorcycles

How to Change Engine Oil and Oil Filter on an Opel Astra.

Model: Vauxhall Astra Astra J - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Engine oil

See other generations:
Video tutorial

In this video tutorial, see how to change the engine oil and oil filter on an Opel Astra J. The first step is to lift the bonnet and secure it with the appropriate prop. Raise the car with a hydraulic jack and place axle stands underneath.

Position a container under the vehicle to collect the used oil. Undo the drain plug counterclockwise with a T45 Torx key and wait for all the oil to drain into the container. While waiting for the oil to fully drain, remove the oil filter by undoing the cover that holds the cartridge with a 24 mm socket and extension; turn the key counterclockwise until the cover is completely undone.

Remove the oil filter and replace it with a new one, along with a new seal (do not overtighten, 25 Nm). Refit the drain plug (tighten to 14 Nm) and top up the engine oil (5w-30) with approximately 4 litres of oil.


Updated on 31 May 2026 by ScegliAuto


Related tutorials

Vauxhall Astra (2004-2010 / Astra H) In this short video, we will see how to perform routine maintenance by replacing the engine oil and oil filter on an Opel Astra H with a 1.7 CDTI eng…
Vauxhall Astra (2009-2016 / Astra J) To replace the oil filter on the Opel Astra J, open the bonnet to access the components in the engine bay. The oil filter is located on the right sid…
Vauxhall Astra (2009-2016 / Astra J) To change the engine oil on an Opel Astra, start the engine for a few minutes to make the oil more fluid, then turn it off. Safely lift the car and r…

Other guides you may be interested in

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos