Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the EGR valve in the Peugeot 308?

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: EGR valve

In this tutorial we can see how to disassemble the EGR valve in the Peugeot 308, a simple operation but one that requires good manual skills. First of all, make sure the engine is cold, then open the hood, remove both windshield wipers, remove the plastic cover and, after separating the brake fluid reservoir from the support, also remove the second cover. Next, remove both the intake duct and the entire air filter box, locate the valve and disconnect the connector. At this point, all that remains is to remove the valve from the housing, insert the replacement if necessary, and reassemble everything following the reverse procedure.

Posted on 27 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the EGR valve of the Peugeot 308 1.6 HDi
How to disassemble the EGR valve of the Peugeot 308 1.6 HDi
Peugeot 308 (2013-2021 / T9, MK 2) The instructions provided in this guide will show us how to disassemble and replace the EGR valve of the Peugeot 308 1.6 HDi. Firstly, we open the ho…
How to Clean the EGR Valve on a Peugeot 308
How to Clean the EGR Valve on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) In this video, let's see how to clean the EGR valve on a Peugeot 308, which can become clogged with carbon deposits causing loss of power, jerky acce…
How to Replace the Thermostat on a Peugeot 308
How to Replace the Thermostat on a Peugeot 308
Peugeot 308 (2013-2021 / T9, MK 2) The thermostat valve on the Peugeot 308 is quite visible and easily accessible. It is located just above the gearbox. Replacing it is important becau…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos