|
Do it yourself
| |||
| ||||
How to change the fuel filter on a Peugeot Partner II 1.6 Blue HDi
Model: Peugeot Partner Tepee
B9
- Years 2008-2018
Let's see how to replace the diesel filter on a Renault Partner 1.6 Blue HDi: lift the hood and remove the engine cover: the filter is a metal cylinder with a hexagonal cap, clearly visible and easily accessible. There are three connectors on the cap that must be carefully disconnected to avoid breaking the plastics: to unscrew the filter cap, use a 24 mm wrench, and remove the cap+filter assembly. Place it in a container, and pull the filter out of its seat in the cap. Take the gasket from the kit (which we may have found on Amazon with the code B0FCG5VP7L for the price of 13.99 euros, with free shipping) and lubricate it with clean diesel, insert the filter into its housing and hand-tighten the cap; tighten with the 24 mm wrench and reconnect the connectors. Turn on the ignition: we will hear the pump activate for a few seconds; repeat this operation 3 times. This will help circulate the diesel and pressurize the system, expelling any residual air. Now we can start the engine.
Posted on 11 January 2026 by ScegliAuto
Video tutorial
Related tutorials
Peugeot Partner Tepee
(2008-2018 /
B9)
In today's video, see how to remove and replace the diesel filter in a Peugeot Partner. First, remember to work only with the engine cold to avoid bu…
Peugeot Partner Tepee
(2008-2018 /
B9)
In this guide we will see the instructions that will allow us to disassemble and replace the diesel filter cartridge of the Peugeot Partner Tepee 1.6…
Peugeot Partner Tepee
(2008-2018 /
B9)
Let's change the old diesel filter on a Peugeot Partner. Lift the front bonnet of the car and locate the diesel filter as shown in the video. Using a…
Other guides you may be interested in
|
Where is the Spare Wheel in the Peugeot 5008?
This video shows where the spare wheel is located in the Peugeot 5008 and how to access it, useful in case of a puncture. As shown, the wheel is not in the usual boot compartment but underneath it, outside the vehicle. To free the wheel, first gather the tools provided, then open the boot, locate the small indicated hatch, and open it. Next, loosen the bolt just released using the large socket wrench enough to lower the wheel to the ground. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.077
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |