|
Do it yourself
| |||
| ||||
How to change the battery of the Peugeot 308 key.
Model: Peugeot 308
T9, MK 2
- Years 2013-2021
On the Peugeot 308, the remote control battery is changed by opening the key without damaging the plastic, so the first step is to work calmly on the body of the key. In the video, it starts by removing the emergency metal key: once freed, the slot where leverage is applied to separate the two halves of the shell becomes visible. At this point, still on the Peugeot 308 key, a small flat tool is inserted into the gap and a slight twist is made to open the casing. The shell separates, revealing the internal part, where the battery compartment is visible. The battery is lifted from its seat and replaced with a new one, being careful to place it in the same position as the old one. Once the replacement is complete, the Peugeot 308 key is closed by aligning the two halves until they snap back together, then the metal key is reinserted into its housing. Finally, it is checked that everything is stable and that the remote control buttons are free and do not get "stuck.
Posted on 24 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Peugeot 308
(2007-2014 /
T7, MK 1)
Want to change the battery in your Peugeot key? Let’s see how to change the key battery on a Peugeot 308. Take your remote key and, using a screwdriv…
Peugeot 308
(2007-2014 /
T7, MK 1)
How to replace the battery in the remote key of a Peugeot 308? Let’s see in detail how to do this. Take your remote key, pry between the two parts of…
Peugeot 308
(2013-2021 /
T9, MK 2)
Replacing the remote battery on a Peugeot 308, as shown in this tutorial, is an extremely simple and quick task. You will need a small flathead screw…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Open a Stuck Boot on the Peugeot 407?
On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.259
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |