Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Remove the Battery for Peugeot 208

Model: Peugeot 208 MK 1, A9 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Battery

See other generations:
This video is currently unavailable

To replace the damaged battery on a Peugeot 208, follow these steps. Open the car door and pull up the bonnet release lever located at the bottom left of the dashboard, then lift the front bonnet, disengaging the locking lever with your fingers, and secure it. Once the engine bay is open, you will find the battery on the right side; unscrew the securing bolts of the battery terminals, then remove the battery from the engine bay and replace it with a new one (same voltage).

Close the bonnet after maintenance. Test the battery by starting the engine.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

In the Peugeot 208, how do you remove the power battery?
In the Peugeot 208, how do you remove the power battery?
Peugeot 208 (2012-2019 / MK 1, A9) In the video presented here, the operations necessary to disassemble the power battery of the Peugeot 208 are described and shown, and not only that,…
Replacing the Battery in a Peugeot 208 1.2 Puretech
Replacing the Battery in a Peugeot 208 1.2 Puretech
Peugeot 208 (2012-2019 / MK 1, A9) Follow these simple steps to remove the engine battery from a Peugeot 208. First, open the bonnet of your vehicle and disconnect the two battery term…
How to Replace the Battery in a Peugeot 208
How to Replace the Battery in a Peugeot 208
Peugeot 208 (2012-2019 / MK 1, A9) In this guide, you will find instructions to remove and replace the battery in a Peugeot 208. First, open the bonnet and disconnect both battery term…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos