How to Replace Spark Plugs on Peugeot 308

Model: Peugeot 308 T7, MK 1 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Spark plugs

See other generations:

This video is currently unavailable

Replace the damaged spark plugs on a Peugeot 308. Open the engine bay and lift the front bonnet, securing it in place. Disconnect the battery terminals.

Unscrew the screws of the engine cover panel, then use a screwdriver to remove the coils from the cylinder head. Use a socket wrench to unscrew the spark plugs and pull them out of the cylinder head.

Install the new spark plugs using the socket extension in the cylinder head, tighten them, and reconnect the ignition coils to each spark plug. Close the engine bay, start the car, and test its operation.

Updated on 16 March 2026 by ScegliAuto

Other guides you may be interested in

Ignition Coil - Maintenance and repair on other vehicles

Spark Plugs - Maintenance and repair on other vehicles

- Maintenance and repair on other vehicles

Engine - Maintenance and repair on other vehicles

Cylinder Head - Maintenance and repair on other vehicles

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!

by ScegliAuto

How to Replace Spark Plugs on Peugeot 308

Related tutorials

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

More videos