Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Starter Motor on a Peugeot Partner Tepee

Model: Peugeot Partner Tepee B9 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Starter motor

See other generations:
Video tutorial

Need to replace the damaged starter motor on your Peugeot Partner Tepee? Here’s how to do it. Open the front bonnet, remove the clips from the hose as shown in the video. Remove the battery (use a socket wrench with the appropriate sockets) and take it out. Unscrew the side screws of the starter motor cover.

Pull out the starter motor and remove it from the engine compartment. Once the part is removed, replace it with a new one, close the compartment with the cover, and securely tighten the retaining bolts with all its parts.

Ensure that the battery is correctly inserted and mounted. Start the car's engine.


Updated on 16 March 2026 by ScegliAuto


Related tutorials

Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Where to Find and How to Access the Cabin Filter on a Peugeot Partner Tepee?
Peugeot Partner Tepee (2008-2018 / B9) The cabin filter on your Peugeot Partner Tepee is located behind the glove compartment on the passenger side. To access it, bend down in the lower ar…
Replacing the 12V Battery of the Peugeot Partner Tepee
Replacing the 12V Battery of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) These simple steps will allow you to remove and replace the 12V battery of the Peugeot Partner Tepee. First, open the bonnet of the vehicle and disco…
Replacing the Key Shell of the Peugeot Partner Tepee
Replacing the Key Shell of the Peugeot Partner Tepee
Peugeot Partner Tepee (2008-2018 / B9) The instructions in this guide will illustrate the procedure for disassembling and replacing the key shell and all its components for the Peugeot Par…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos