Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 508
  6. : Removing the headlight on Peugeot 508

Peugeot 508 - Video tutorial

Model: Peugeot 508 MK 1 - Years 2010-2018
Part: Headlight
Operation: Removing the headlight on Peugeot 508

Lift the hood and put on the special support rod. Unscrew the five t20 torx screws located above the front bumper grille. Then, using a socket wrench, unscrew the 10 mm bolts that secure the front protection cover, then the screws that secure the light at the top. Go to the lower area and unscrew the screws located under the bumper. Other torx and other bolts are finally placed in the wheel arch: remove these too. Now that the headlight is no longer fixed, you can remove it by disconnecting the two connectors in the meantime. With the light free, position yourself on a workbench and replace any bulbs.


Posted on 16 January 2024 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos