Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Peugeot
    3. :
  3. 308
    4. : How to replace the battery of Peugeot 308 1.6 HDI.

Peugeot 308 - Video tutorial

Model: Peugeot 308 T9, MK 2 - Years 2013-2021
Part: Battery
Operation: How to replace the battery of Peugeot 308 1.6 HDI.

Today's guide will show us the necessary steps on how to disassemble and replace the engine battery of the Peugeot 308 1.6 HDI, as well as the 208. First, we open the car's engine hood and begin to remove the plastic cover of the battery; we also remove the control unit that we find next to it, as shown in the video. At this point, we disconnect both battery terminals (positive and negative), finally unscrewing the bracket screw located at the bottom right; we remove the battery from the engine compartment and replace it with the new one, having the same amperage.


Posted on 23 May 2023 by ScegliAuto

    Frequently Asked Questions

    • 308 2013-2021 - How do you replace the battery in the Peugeot 308? Read Answer
    • 308 2007-2014 - What to do if the Peugeot 308 does not start? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos