Do it yourself
Frequently asked questions about cars and motorcycles

Reset Oil Change Light on Renault Megane 2

Model: Renault Megane Megane III, Megane 3 - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Service warning light

See other generations:
Video tutorial

If you have performed the oil change and routine maintenance yourself and are now here, you probably haven't managed to turn off the light that warned you of the need for an oil change. Now, we will show you how to do it. Insert the key and start the car. Now press the clutch pedal down and hold it. Scroll through the onboard computer menu using the controls on the lever behind the steering wheel until you reach the oil change signal.

At this point, select the option by holding the button for a couple of seconds without releasing the clutch. The light will start flashing, and after 30 seconds or even a minute, the process will be complete.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

Renault Megane (2002-2010 / Megane 2) These brief and simple steps will show you how to reset the service light for the regular maintenance oil change of the Renault Megane. First, get in…
Renault Megane (2015-2023 / Megane IV, Megane 4) The steps necessary to change the engine oil on a Renault Megane 4 are quite few. Here they are listed: 1) lift the car on a ramp or on axle stands; …
Renault Megane (2015-2023 / Megane IV, Megane 4) The vehicle in question is the Renault Megane 4, and we will explain how to reset the service light. This procedure should only be carried out after …

Other guides you may be interested in

    Frequently Asked Questions

    • Megane 2008-2015 - How do you reset the Renault Megane Service warning light? Read answer
    • Megane 2015-2023 - How to reset the "Service" light on a Renault Megane? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos