Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Radio Controller

Model: Saab 9 3 MK 2 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Car stereo

See other generations:
Video tutorial

This video explains how to remove the radio from a Saab 9 3. Use the tip of a small flathead screwdriver to unclip the clips inside the air grille. Using a screwdriver and a plastic lever simultaneously, gently remove the block with the attached grille.

Now that it has been extracted, you can see the three spring clips that were holding it in place. At this point, you will have access to two screws: unscrew them with a Torx screwdriver and remove the stereo controller block.

To remove it completely, you must first disconnect its electrical connection.


Updated on 10 February 2026 by ScegliAuto


Related tutorials

Car Stereo Installation
Car Stereo Installation
Saab 9 3 (2002-2014 / MK 2) Installing a car stereo is a straightforward task that you can do independently. Before starting, disconnect the battery cables. Then, remove all the…
Dismantling Dashboard and Car Radio
Dismantling Dashboard and Car Radio
Saab 9 3 (2002-2014 / MK 2) Using a plastic tool to avoid damaging the bodywork, lever at the sides of the air conditioning vent panel to disengage the plastic clips and remove …
Installing an Aftermarket Radio in a Saab 9-3
Installing an Aftermarket Radio in a Saab 9-3
Saab 9 3 (2002-2014 / MK 2) To install an aftermarket radio, first remove the original unit. Purchase a fitting kit to insert into the dashboard and a universal wiring harness t…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos