|
Do it yourself
| |||
| ||||
Changing Your Car's Brake Discs
Model: Skoda Fabia
Mark1, 6Y
- Years:
1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
Video tutorial
In this step-by-step guide, I will provide all the useful instructions on how to best replace your car's brake disc. Both the braking system and the discs of the vehicle are crucial for ensuring the vehicle operates efficiently, benefiting the safety of both the driver and passengers. This procedure can also be carried out independently without needing a mechanic. First, turn the steering wheel towards your side so that the disc caliper faces you. Lift the car with the jack and remove the wheel after unscrewing the wheel bolts. Use a hex key to unscrew all the bolts on the back that secure the caliper to the frame. Next, place the car on a flat surface and engage a gear to block the front wheels. Then, you can slide off the brake caliper. At this point, only the caliper bracket with the brake pads inside will remain. Remove the pads using a suitable flat screwdriver, taking care not to damage the disc. Then unscrew the bolts that secure the bracket to the hub. Set them aside as they will be needed for reassembly. At this point, only the brake disc will remain, which needs to be replaced.
Updated on 22 February 2026 by ScegliAuto
Related tutorials
Skoda Fabia
(2007-2014 /
5J, Mark2)
Lift the vehicle on suitable axle stands and remove the front wheel; remove the protective caps from the caliper mounting bolts and unscrew them to d…
Skoda Fabia
(2007-2014 /
5J, Mark2)
Before starting the engine oil change in a Skoda Fabia 2, it is advisable to use a pre-change cleaner, adding it after the car has been running for a…
Skoda Fabia
(1999-2007 /
Mark1, 6Y)
To replace the front brake pads, lift the vehicle on suitable car stands and remove the front wheel; then disconnect the wear sensor connector, remov…
Other guides you may be interested in
|
How to Remove the Rear Seat of a Hyundai Tucson?
To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.094
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |