Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Smart Roadster fuse box

Model: Smart Smart 452, Roadster - Years 2003-2005
Part: Fuse box

In this description we will give indications on the position of the fuse boxes and the relative position of the main fuses. The fuse box on this car is located on the left side of the steering wheel just below the dashboard near the driver's side door. In this box there are, among others, the fuse of the air conditioning fan, that of the electric windows, that of the electric wipers and the windscreen washer pump, that of the radio-cd, that of the fog lights, that of the fuel pump, that of the rear window wiper. rear and that of the headlights.

Posted on 11 May 2022 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses located in the Smart Roadster?
Where are the fuses located in the Smart Roadster?
Smart (2003-2005 / 452, Roadster) The fuses of the Smart Roadster are contained within the appropriate fuse box installed inside the vehicle. The fuse box is located in the lower left…
How do you open the hood of the Smart Roadster?
How do you open the hood of the Smart Roadster?
Smart (2003-2005 / 452, Roadster) In order to open the front hood of the Smart Roadster, you have to go inside the passenger compartment by identifying the lever located immediately u…
How to replace the gearbox oil in the Smart Roadster?
How to replace the gearbox oil in the Smart Roadster?
Smart (2003-2005 / 452, Roadster) In this tutorial we can see how to change the gearbox oil in the Smart Roadster, a very simple and fast operation, to be done every 100,000 km or so.…

Other guides you may be interested in

    Frequently Asked Questions

    • Smart 2007-2015 - Where is the fuel pump relay on a Smart ForTwo located? Read answer

How to Remove the Steering Wheel from a Citroen C3

How do you remove the steering wheel from a Citroen C3? Before removing the steering wheel, disconnect the battery terminals located in the engine bay. Follow these steps to proceed with the removal: remove the inspection caps at the back of the steering wheel (if present), then, using a socket or screwdriver, undo the screws securing the steering wheel cover (where the airbag is located). Once the airbag (driver's side) is released, disconnect the power connectors and remove it. Using a socket, undo the large central bolt and take the steering wheel off its mount. For reassembly: connect the power connectors, then press the steering wheel with your hands (until it fits into its mount) and subsequently tighten the large bolt.

Watch the video!


by ScegliAuto

More videos