Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Smart ForTwo

Model: Smart Smart 451 - Years 2007-2015
Part: Headlight bulb

Replacing the front headlight bulb on this model of car is quite simple, although the working space is relatively limited; start by removing the front cover by unclipping the fastening levers located just under the front edge, inside the grille that houses the fog lights: lift the front edge and you will be able to slide off the cover; now remove the protective cap from the bulb holder, disconnect the power connector from the bulb, and unclip the retaining spring to extract it from its holder; then insert the new bulb, secure it with the spring, and reconnect the power connector before repositioning the cap.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the headlight bulb of a Smart ForTwo?
How to remove the headlight bulb of a Smart ForTwo?
Smart (2004-2006 / 454, Fourfour1) Let's start by removing the front top cover of our Smart ForTwo, using the ignition key, and then removing the plastic underneath. After that, we wil…
Smart Fortwo headlight bulb replacement
Smart Fortwo headlight bulb replacement
Smart (2007-2015 / 451) Let's see in this video how to change the light bulb of the small Smart Fortwo subcompact. The procedure is very simple and takes only a few minutes:…
Smart Fortwo 453 headlight bulb replacement
Smart Fortwo 453 headlight bulb replacement
Smart (2014-2022 / 453) In this short and simple guide we will see the main instructions for removing and replacing the headlight bulb of the Smart Fortwo 453. First we open…

Other guides you may be interested in

How to Replace the Rear Indicator Bulb on an Audi A3

Position the car on a ramp or flat surface and immobilise it. Now, open the boot lid and, inside, corresponding to the rear light where you want to replace the indicator bulb, remove the small plastic cover using a screwdriver. Inside the hole, you will find a bolt (to be removed with a flat screwdriver); once this is undone, you can remove the entire rear light assembly. After this, proceed to remove the part inside the light assembly by unscrewing the 2 small bolts, as shown in the images. In the part you just removed, all the bulbs of the light are mounted. To replace them, simply remove them from their sockets and fit the new ones. To reassemble the entire unit, repeat all the steps shown in the images in reverse order.

Watch the video!


by ScegliAuto

More videos