Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to know the fuse diagram of a Suzuki Ertiga

Model: Suzuki Suzuki Various

In this video, we are shown the fuse diagrams present in a Suzuki Ertiga car. The first fuse box is located inside the engine compartment and contains fuses assigned to: ignition switch, fuel pump, air compressor, radiator, power steering, ABS control module, high beams, low beams, fog lights, CNG valve, etc. The second fuse box is located inside the vehicle's cabin and contains fuses assigned to: steering lock, ABS, horn, brake lights, airbags, windshield wipers, interior lights, windshield washer, radio, etc.

Posted on 30 October 2023 by ScegliAuto

Video tutorial

Related tutorials

How to know the fuse diagram of a Suzuki Ertiga 2016
How to know the fuse diagram of a Suzuki Ertiga 2016
Suzuki Suzuki Various In this video we see how to know the fuse diagram of a 2016 Suzuki Ertiga car. The first fuse panel is located inside the vehicle's passenger compart…
How to change the time on the Suzuki Ertiga
How to change the time on the Suzuki Ertiga
Suzuki Suzuki Various In this article, we will see how to change the time on the Suzuki Ertiga. To perform this procedure, we will not need any tools or software and it ta…
Where are the fuse boxes of the Suzuki Solio located?
Where are the fuse boxes of the Suzuki Solio located?
Suzuki Suzuki Various The Suzuki Solio, produced from 2010 to 2015, has two fuse boxes inside. The first fuse box is located inside the cabin behind the driver's side glov…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos