|
Do it yourself
| |||
| ||||
How to Repair the Windshield Wiper Motor on a Tata Safari Storme
Model: Tata Safari Storme
MK 1
- Years 2012-2019
Neglecting such an important part of your vehicle can be very dangerous. Fortunately, it is still possible to repair parts without necessarily replacing them, as we see with the windshield wiper motor on the Tata Safari Storme. First, remove the grille, then lift the hood and identify and remove the front wiper motor from there. First, we performed an electrical check to confirm that this was indeed the problem. You could also do this with a multimeter. Under the grille, we find the bar with the motor. There are worn seals, stuck screws, oxidized contacts, and broken wires. To free all these parts, use a penetrating oil like WD-40, then clean the oxidized parts and remove the accumulated dirt. Replace the seals and check the wires. Now, we can reassemble it. It works perfectly now, as we can see in the video.
Updated on 28 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Tata Safari Storme
(2012-2019 /
MK 1)
You can program a new remote key for the Tata Safari Storme without needing an already programmed key or consulting a professional. The procedure is …
Tata Safari Storme
(2012-2019 /
MK 1)
To replace the ECU on the Tata Safari Storme, open the hood to access the components inside the engine bay. The ECU is located immediately behind the…
Tata Safari Storme
(2012-2019 /
MK 1)
Replacing the remote battery in the Tata Safari Storme, as shown in this tutorial, is an extremely simple and quick task. To do this, you will only n…
Other guides you may be interested in
|
Where is the Fuel Filter Located in a Volvo XC60?
In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.370
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |