Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the EGR valve of Tata Hexa.

Model: Tata Hexa MK 1 - Years 2016-2020
Part: EGR valve

Today we will see, in this short and simple guide, how to disassemble and replace the Egr valve of the Tata Hexa. First of all, we open the engine hood of our car and start disassembling and removing the battery, disconnecting the clamps; then we disconnect the exhaust gas duct connected to the Egr valve, unscrewing the bolts with a socket wrench, as shown in the video. At this point, we disconnect the electrical connector of the valve and unscrew the fixing bolts to remove it, carrying out the cleaning or replacement, following the video tutorial to the end!

Posted on 24 May 2023 by ScegliAuto

Video tutorial

Related tutorials

Replacing the headlight bulb of the Tata Hexa
Replacing the headlight bulb of the Tata Hexa
Tata Hexa (2016-2020 / MK 1) Today we will see, in this video tutorial, how to disassemble and replace the headlight bulb of the Tata Hexa, following these simple and quick steps…
How to install the Android multimedia system on the Tata Hexa
How to install the Android multimedia system on the Tata Hexa
Tata Hexa (2016-2020 / MK 1) Today we will see the main instructions that will allow us to disassemble and replace the stock car stereo with one of the Android type from Tata Hex…
How do you replace the headlight bulb on the Tata Hexa?
How do you replace the headlight bulb on the Tata Hexa?
Tata Hexa (2016-2020 / MK 1) In order to replace the bulb in the Tata Hexa headlight, you need to open the bonnet in order to access the rear part of the headlight corresponding …

Other guides you may be interested in

How to Replace the Key Battery of a Ford B Max

Replacing the remote key battery of the Ford B Max is very simple, and the same procedure can be repeated for other models from the same manufacturer that share the same key design; start by removing the back casing of the key, which bears the manufacturer's emblem: on the upper edges of the key, there are two elements that must be pressed simultaneously to release the cover; at this point, use the tip of a screwdriver to pry off and extract the remote section that houses the buttons to access the battery compartment and replace it.

Watch the video!


by ScegliAuto

More videos