Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How the Tire Pressure Monitoring System Works on the Tesla Model 3

Model: Tesla Model 3 MK 1 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Tire pressure warning light

Video tutorial

The TPMS on the Tesla Model 3 monitors the pressure of each tire using sensors. If the message "Tire Pressure Monitoring System Fault" appears, the issue may be a faulty sensor, but before replacing it, try these methods.

First is the Simple Reset: Turn off the vehicle, exit, lock it, and let it rest for 5 minutes. Re-enter and restart.

If it was a temporary communication fault, the message will disappear. Next, try the Hard Reset: Press and hold both buttons on the steering wheel for 10 seconds.

This restarts the infotainment and other modules, allowing the system to communicate with the sensors. Finally, Identify the faulty sensor: Drive for a few minutes and observe which wheel shows 0 PSI. Use an air compressor to lower the pressure to halfway and then bring it back to the optimal level.

This may recalibrate the sensor. If none of the methods work, contact Tesla online: they may resolve the issue remotely.

If the sensor is faulty, ask them to check the battery before replacing it.


Posted on 30 August 2026 by ScegliAuto


Related tutorials

How does the TPMS of the Tesla Model 3 work?
How does the TPMS of the Tesla Model 3 work?
Tesla Model 3 (2017-2026 / MK 1) In this video we can see how the TPMS of the Tesla Model 3 works, which is completely automatic and integrated into the car's electronics. When the p…
How to replace the battery of the Tesla Model 3 remote control
How to replace the battery of the Tesla Model 3 remote control
Tesla Model 3 (2017-2026 / MK 1) In the following guide you will find the description of all the steps necessary to replace the battery of your Tesla Model 3 remote control. First of…
How do you reset the tire pressure light on the Tesla Model 3?
How do you reset the tire pressure light on the Tesla Model 3?
Tesla Model 3 (2017-2026 / MK 1) To reset the tire pressure warning light of the Tesla Model 3, first you will need to inflate the tires until they reach the optimal pressure value: …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos